Search
× Search

News

Literature Leaked on the EL-1 Speedlight
CanonNews
/ Categories: Rumors, Canon Accessories
This post may contain affiliate links(s). An affiliate link means I may earn advertising/referral fees if you make a purchase through my link, without any additional cost to you. It helps to keep this site afloat. Thank you in advance for your support. If you like what we do here, maybe buy me a coffee.

Literature Leaked on the EL-1 Speedlight

We discovered a patent for a Canon speedlight last year that sounded pretty cool (literally) as it employed active cooling.  It seems like the EL-1 is very similar.  Of course we'll have to wait to get images of the speedlight to see if it's exactly the one in the patent, but it sounds very similar.

Here is the writeup (machine translated)

Canon EL-1 Speedlight

Stabilization of light emission amount and improvement of continuous light emission performance
-By adopting a newly developed highly durable xenon tube, it suppresses variations in the amount of light emitted and realizes stable light emission.
-Equipped with a newly developed active cooling system that uses a blower fan and glass panel. Circulating air inside the strobe
Suppresses the temperature rise of the heat spot. Heat resistance is improved by combining with a highly durable xenon tube, and the number of continuous light emission is about 160 times.
Minimal emission of 1/8192
-By adopting a newly developed xenon tube and improving the accuracy of light emission control, stable minute light emission of at least 1/8192 is realized during manual light emission.
-The setting range for manual flash has been expanded from 1/128 to 1/8192, expanding the range of use for high-sensitivity shooting. Handheld strobe
It enables new shooting expressions in scenes that require delicate light, such as when shooting portraits against a starry sky with ultra-high sensitivity.
Comfortable strobe shooting with the adoption of a new lithium-ion battery
・ By adopting a large-capacity lithium-ion battery LP-EL capable of discharging a large current and newly designing a charging circuit, strobe charging is completed after light emission.
Achieves high-speed charging with a charging time of approximately 0.1 to 0.9 seconds. Speedlite EL-1 alone, "Speedlite 600EX II RT" and external power supply
Faster charging is possible than when using the combination of the battery pack "CP-E4N".
-Achieves 1/1 light emission of about 335 times when fully charged. It can also be used for mass shooting over a long period of time. Compact battery pack "CP-E4N"
By using in combination with, it achieves about 680 times of light emission at 1/1 light emission.
-For the first time as a Canon external strobe, it supports battery level display. Easy-to-understand battery replacement timing, battery
Exchange can be done efficiently.
-Adopts the same battery charger "LC-E6" as cameras such as "EOS R5".
Full basic performance and excellent operability
-Achieves a large amount of light emission with a maximum guide number of approximately 60. In addition, the strobe light irradiation angle corresponds to the focal length of the lens, 24-200 mm. Built-in wide
By using a panel, it also supports the shooting angle of view of an ultra-wide-angle lens with a focal length of 14 mm. Also, is the upward bounce angle 90 ° in the conventional way?
Expanded to 120 °.
-Adopts a dust-proof and drip-proof structure while being equipped with an active cooling system that suppresses temperature rise. Sealing on the mating surfaces of exterior parts
Maintains airtightness by applying. Packing and rubber materials are used for the battery compartment lid and terminal cover, and the mounting legs are "dust-proof and drip-proof."
Equipped with an "adapter", it can be attached to a compatible camera to prevent water droplets and dust from entering the strobe contact area.
-Wireless strobe photography via radio wave communication and optical communication is possible. Supports both sender and receiver functions. Away from the strobe and camera
It is possible to produce various lights with an off-camera by arranging it in a position and shooting. -Radio communication The rear curtain can be synchronized during wireless shooting.
-By installing a modeling lamp with two-color LED, lighting is possible while imagining the color and direction of light before shooting.
・ When the light emission mode is switched from E-TTL automatic light control to manual light emission, shooting can be continued with the light emission amount memorized by automatic light control.
Equipped with "Molly".
-Intuitive operability is realized by adopting a joystick.
-The bounce adapter diffuses the strobe light to suppress the shadow of the subject and achieve a more natural depiction.
-By attaching a color filter, you can change the white balance of both the subject and the background.
-By assigning "Strobe function setting" to the camera button in "Button customization" of the camera, the strobe setting can be changed to the camera.
Can be changed to enable efficient shooting.

 


Previous Article Literature Leaked about the M50 Mark II
Next Article Canon launches the Canon EOS M50 "Mark II"
Print
blog comments powered by Disqus

Keep In Touch

FacebookTwitterLinkedIn

Our Sponsors

Want to buy me a coffee?

Free Shipping to the USA and Canada*

Use CANONNEWS for $10 off AuroraHDR

Use CANONNEWS for $10 off Luminar

*Conditions may apply

 

Terms Of UsePrivacy Statement© 2024 by CanonNews. This site is not affiliated with Canon Inc. or it's subsidiaries.
Back To Top